Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

To reset the service indication on the vehicle, proceed as follows: turn on the ignition (do not start the engine), locate the button at the bottom of the control panel to the left of the speedometer. Press and hold this button until the remaining mileage indication for the next service appears and starts flashing, then release it. Press the button again and wait until the display returns to show the oil level indication. Then turn off the ignition and the service reset will be complete.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Juke (2010-2019 / MK 1) In the Nissan Juke, after completing all the work required by the scheduled maintenance, you need to manually remove the warning light and reset the …
Nissan Juke (2010-2019 / MK 1) In this tutorial, you will see how to reset the service light on a Nissan Juke, a very simple and quick operation to perform only after completing al…
Nissan Juke (2010-2019 / MK 1) In this tutorial, you will see how to reset the service light on a Nissan Juke, a very simple and quick operation to perform only after completing al…

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos