Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on the Nissan Micra K12, turn on the instrument cluster without starting the engine. Press and hold the button located to the right of the speedometer (below the speedometer) until the mileage flashes with the spanner warning light.

At this point, press to increase the mileage to 63,000, then reset it to 0. When zero appears, press the button once more to display 1,000. When 1,000 appears, do not press any buttons to show the total mileage, and finally, you can turn off the instrument cluster.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Micra?
How to Reset the Service Light on a Nissan Micra?
Nissan Micra (2002-2010 / K12) To reset the Service light on a Nissan Micra, turn on the ignition to access the menu on the radio display. Press the OK button, then navigate to the…
How do you reset the Service light on a Nissan Micra?
How do you reset the Service light on a Nissan Micra?
Nissan Micra (2002-2010 / K12) It will be possible to completely reset the Service light on the instrument panel of the Nissan Micra by turning on the instrument panel, allowing ac…
How to reset the Service light on the Nissan Micra?
How to reset the Service light on the Nissan Micra?
Nissan Micra (2010-2017 / K13) To reset the Service light on the Nissan Micra, turn on the instrument cluster by rotating the key in the ignition switch: once the cluster is on, pr…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos