Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Instrument Cluster Diagnostic Test on a Nissan Micra K12

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

Here’s how to access the self-diagnostic mode of the instrument cluster on a Micra K12. Turn on the ignition, press and hold the odometer button ("ODO" on the dashboard) for about 5 seconds. The cluster will enter "test" mode and display a sequence of LEDs or screens.

Navigate through the menu using the same button: press briefly to scroll through the options, hold to select or exit. Look for the "error codes" menu, read the error codes, and interpret them using a table found in the original video.

If the procedure doesn’t work, try holding down the "mode" or "reset" button (depending on the dashboard configuration).


Posted on 30 May 2026 by ScegliAuto


Related tutorials

Service Reset on a Nissan Micra K12
Service Reset on a Nissan Micra K12
Nissan Micra (2002-2010 / K12) In today's guide, we will see how to perform the service reset on a Nissan Micra, K12 model produced from 2002 to 2010. Let's start the reset procedu…
How do you reset the service light in the Nissan Micra k12?
How do you reset the service light in the Nissan Micra k12?
Nissan Micra (2002-2010 / K12) Many drivers choose to take care of their car's service by themselves, as in the case of the Nissan Micra k12, replacing the motor oil, the oil filte…
In the Nissan Micra k12, how do you reset the immobilizer?
In the Nissan Micra k12, how do you reset the immobilizer?
Nissan Micra (2002-2010 / K12) When the immobilizer, unless there is a real failure of components, electronic circuits, boards, cold solder joints etc., which require disassembly a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos