Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Nissan Micra?

Model: Nissan Micra K12 - Years 2002-2010
Part: Service warning light

As shown in this tutorial, resetting the service light in the Nissan Micra is an extremely simple and quick operation. Before proceeding, ensure that you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key but leave it in the initial position. Next, press and hold the button located under the speedometer, turn on the ignition, and keep the button pressed until the service interval starts to flash. At this point, press the same button repeatedly to set the desired mileage and wait a few seconds.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Nissan Micra?
How to reset the Service light on the Nissan Micra?
Nissan Micra (2010-2017 / K13) To reset the Service light on the Nissan Micra, turn on the instrument cluster by rotating the key in the ignition switch: once the cluster is on, pr…
How to reset the service on a Nissan Micra?
How to reset the service on a Nissan Micra?
Nissan Micra (2010-2017 / K13) In this tutorial, you will see how to reset the service on a Nissan Micra, a very simple and quick operation to be performed only after completing al…
How do you reset the Service light on a Nissan Micra?
How do you reset the Service light on a Nissan Micra?
Nissan Micra (2002-2010 / K12) From the instrument panel of the Nissan Micra, it will be possible to turn off the Service light by turning on the instrument panel, allowing access …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos