Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Calibrate the Touch Screen of the Nissan Leaf

Model: Nissan Leaf ZE0, MK 1 - Years 2010-2017
Part: Onboard computer

In this video, see how to calibrate the touch screen of the Nissan Leaf: press the "map" button located on the right side of the screen and the power button located on the opposite side at the bottom left. This will enter the diagnostic mode of the menu, where you will find two options: press the second one: "confirmation/adjustment", then "display diagnosis", and then "touch panel", followed by "touch panel calibration". Then, touch the points marked with a "+" to calibrate the panel. When finished, press "map" to exit.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on the 2012 Nissan Leaf
Where to Find the Fuse Box on the 2012 Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) In this new mini guide dedicated to your 2012 Nissan Leaf, we will discover where the fuse box containing all the various fuses of the vehicle is loc…
Where to Find the Cabin Fuse Box of the Nissan Leaf 2
Where to Find the Cabin Fuse Box of the Nissan Leaf 2
Nissan Leaf (2018-2025 / MK 2, ZE1) If you don't know where the OBD port of your second-generation Nissan Leaf is located, don't worry because this guide describes all the steps you nee…
How do you reset the tire pressure light of the Nissan Leaf?
How do you reset the tire pressure light of the Nissan Leaf?
Nissan Leaf (2010-2017 / ZE0, MK 1) In order to reset the tire pressure warning light of the Nissan Leaf, first you need to inflate the tires, bringing them back to the recommended pres…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos