Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Agila
    4. : Cabin air filter

Vauxhall Agila - Cabin air filter

Vauxhall Agila (2000-2007 / Agilaa)
Opel Agila cabin air filter replacement
In today's video tutorial we will see how to replace the cabin air filter of the Opel Agila, following these simple steps. First we get on board the car, on …read all…
Posted on 5 May 2024 by ScegliAuto
Vauxhall Agila (2000-2007 / Agilaa)
Cabin air filter replacement
The passenger compartment air filter of the vehicle in question is located on the passenger side, immediately under the dashboard pocket which acts as a glove …read all…
Posted on 1 September 2023 by ScegliAuto
Vauxhall Agila (2000-2007 / Agilaa)
Pollen filter replacement
The pollen filter purifies the air in the passenger compartment and is located behind the glove box on the passenger side. Obtain the pollen filter of the same …read all…
Posted on 17 July 2023 by ScegliAuto
Vauxhall Agila (2008-2015 / Agilab)
Cabin air filter replacement
The cabin air filter of the vehicle in question is located on the passenger side, immediately under the glove box (however it is not necessary to remove the …read all…
Posted on 28 June 2023 by ScegliAuto
Car stereo (3) Battery (1) Bodywork (1) Key (1) Timing belt (2) -board computer (3) Checks and maintenance (7) Dashboard (1) Headlight (2) Tail light (3) Air filter (4) Cabin air filter (4) Clutch (1) Headlight bulb (1) Rear light bulb (1) Engine oil (2) Door panel (5) Front bumper (1) Rear bumper (1) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (4) Fuse box (4) Drums and shoes (1) Engine head (1) Valve (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos