Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Opel Adam
    4. : Headlight bulb

Vauxhall Adam - Headlight bulb

Headlight Bulb Vauxhall Adam (2013-2019 / mk 1)

Vauxhall Adam (2013-2019 / MK 1)
How to replace the position bulb of the front headlight of the Opel Adam.
Today we will discover the instructions that will allow us to disassemble and replace the position bulb of the front headlight of the Opel Adam. First, let's …Read all…
Posted on 27 November 2025 by ScegliAuto
Vauxhall Adam (2013-2019 / MK 1)
How to replace the front bulb of the Opel Adam
When the error code 20 appears on an Opel Adam, it means that the low beam headlight bulb on the right side needs to be replaced. To perform this operation, we …Read all…
Posted on 30 March 2024 by ScegliAuto
Vauxhall Adam (2013-2019 / MK 1)
Replacing the Front Headlamp Bulb on an Opel Adam
Today, you will learn how to remove and replace the front headlamp bulb on an Opel Adam. First, open and lift the bonnet of your car; then remove the plastic …Read all…
Posted on 21 June 2026 by ScegliAuto
Spark plugs (2) Glove compartment (1) Key (4) Timing belt (2) Onboard computer (2) Checks and maintenance (2) Dashboard (1) Tail light (1) Air filter (4) Cabin air filter (2) Light bulb (2) Side marker bulb (1) Headlight bulb (3) Tail light bulb (1) (1) Engine oil (2) Clock (1) Shift knob (1) Fuse box (9) Warning light – error code (8) (1) Tire pressure warning light (3) Service warning light (30) Fuel cap (1)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos