Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on an Opel Adam

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Headlight bulb

Today, you will learn how to remove and replace the front headlamp bulb on an Opel Adam. First, open and lift the bonnet of your car; then remove the plastic protective cover for the bulbs located at the back of the headlamp. At this point, disconnect the electrical connector, which you will remove along with the bulb; detach the bulb from the connector and replace it with a new one of the correct type (in this case, H7 fitting). Finally, insert the new bulb into the connector and position everything back inside the headlamp, as shown in the video!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Opel Adam remote control?
How do you replace the battery of the Opel Adam remote control?
Vauxhall Adam (2013-2019 / MK 1) In order to replace the battery of the Opel Adam remote control, you need to press the button located on the top of the device, so that the key ring …
How to Manually Reset the Service Light on an Opel Adam
How to Manually Reset the Service Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To manually reset the maintenance light on your Opel Adam, it only takes a few seconds, and with the following instructions, you will complete the op…
Guide to replacing the timing chain on an Opel Adam
Guide to replacing the timing chain on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) Today we will go through the main instructions for replacing the timing chain on an Opel Adam. First, open the bonnet of the vehicle and begin to dis…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos