Do it yourself
Frequently asked questions about cars and motorcycles

How to change the brake light on the Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part:

See other generations:
Video tutorial

In this video, we can see how to change the brake light bulb of the Opel Astra H: it is a fault that this vehicle signals to us, even in position, so all we need to do is equip ourselves with the bulb, silicone gloves, and proceed. Removing the rear light assembly is quite easy; just remove the three screws that hold it in place, and then take off the rear cover that protects the bulbs.

In this specific case, we can clearly see that the bulb is burnt out, as it is completely black. To change it, gloves are needed because if we touch the new bulbs with bare hands, we condemn them to last half as long.

We close the rear cap, reconnect the electrical connectors, and put the light assembly back in place, securing it with the three fixing screws.


Posted on 29 January 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) In this guide for your Opel Astra H, you will learn the steps to quickly and safely replace the brake light. First, ensure the vehicle is turned off,…
Vauxhall Astra (2009-2016 / Astra J) Open the rear hatch of the Opel Astra J and unscrew all the screws securing the headlamp, then gently pull it out of the compartment. At the back of …
Vauxhall Astra (1998-2006 / Astra G) This video shows how to change the number plate light on an Opel/Vauxhall Astra G: the small light unit is located on the right side of the number pl…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos