Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb in the rear light of the Opel/Vauxhall Astra H.

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Light bulb

In this video, we will see how to replace the bulb in the rear light of an Opel/Vauxhall Astra H: we open the trunk, where we find some panels that we can open using a plastic screw, allowing us to access two large white plastic screws that we need to unscrew to free the light assembly. We disconnect the electrical connector, and at that point, we can pull out the light from the outside. Now we can choose whether to change just the bulb or the entire light assembly if we wish. If we want to change the bulb, we need to remove the cross-head screws around the rear cover, and we can access the bulb that needs to be replaced.

Posted on 30 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Opel Astra?
How to Replace the Rear Light Bulb on the Opel Astra?
Vauxhall Astra (2015-2022 / Astra K) To replace the rear light bulb on the Opel Astra, open the rear hatch to access the boot area: on the side corresponding to the bulb to be replaced, …
How to Replace the Rear Light Bulb on an Opel Astra J?
How to Replace the Rear Light Bulb on an Opel Astra J?
Vauxhall Astra (2009-2016 / Astra J) To replace the rear light bulb on the Opel Astra, open the tailgate to detach the inner side panel of the boot corresponding to the bulb that needs r…
How to remove the rear ceiling light in an Opel Astra
How to remove the rear ceiling light in an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) In this video, learn how to replace the bulb in the rear ceiling light of an Opel Astra. Use a screwdriver to pry between the ceiling light and the h…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos