Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Third Brake Light on an Opel Astra?

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part:

See other generations:
Video tutorial

As shown in this tutorial, replacing the third brake light on an Opel Astra J is an extremely simple and quick operation. It is recommended to use a plastic spatula, as a regular screwdriver may leave marks on the bodywork.

After ensuring the key is not inserted, position yourself in front of the light and begin to pry along the entire perimeter. Once released, gently extract it, taking care not to damage the various contacts.

To install the replacement, simply insert it into the housing and secure it firmly.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) To remove the third brake light, open the boot and unscrew the side pins attached to the plastic cover that serve as support for the parcel shelf cab…
Vauxhall Astra (2004-2010 / Astra H) This guide explains the procedure needed to remove and replace the third brake light or its bulbs on the Opel Astra H. First, open the boot and start…
Vauxhall Astra (2015-2022 / Astra K) Below we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Astra. First, open the r…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos