Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Centre High-Level Brake Light of the Opel Astra H

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Light bulb

This guide explains the procedure needed to remove and replace the third brake light or its bulbs on the Opel Astra H. First, open the boot and start by removing the plastic inner panel; to do this, remove the clips and unscrew the screws found inside the handle, as shown in the video. At this point, pry at the sides of the panel to remove it completely; then, take off the plastic cover and subsequently the third brake light by disconnecting the electrical connector. Replace the bulbs or the entire light unit!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light from the Opel Astra H GTC
How to Remove the Third Brake Light from the Opel Astra H GTC
Vauxhall Astra (2004-2010 / Astra H) To remove the third brake light, open the boot and unscrew the side pins attached to the plastic cover that serve as support for the parcel shelf cab…
How to Replace the Third Brake Light on an Opel Astra?
How to Replace the Third Brake Light on an Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) As shown in this tutorial, replacing the third brake light on an Opel Astra J is an extremely simple and quick operation. It is recommended to use a …
How to Disable Start&Stop in an Opel Astra?
How to Disable Start&Stop in an Opel Astra?
Vauxhall Astra (2015-2022 / Astra K) In this tutorial, you will learn how to disable Start&Stop in an Opel Astra, a very simple operation, for example, if you find the system too intrusi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos