Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Brake Light Bulb on the Rear Lights of an Opel Astra

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Open the rear hatch of the Opel Astra J and unscrew all the screws securing the headlamp, then gently pull it out of the compartment. At the back of the headlamp, locate the plastic cover protecting the bulbs, unclip or unscrew the fasteners and remove the cover.

Extract the burnt bulb and insert the new one. Reposition the plastic cover and secure it with the fasteners or screws, then reinsert the headlamp into its original position and screw all the screws back in. Close the hatch and press the brake pedal to check that the brake light works correctly before finishing the operation.


Posted on 7 October 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) This tutorial shows how to replace the rear light bulbs on an Opel Astra, a very simple and quick operation. First, ensure that the key is not in the…
Vauxhall Astra (2004-2010 / Astra H) In this tutorial, you will learn how to replace the rear light bulbs on an Opel Astra. This operation is extremely simple and quick. First, ensure th…
Vauxhall Astra (2004-2010 / Astra H) In this tutorial, you will see how to replace the rear light bulbs in the Opel Astra, a very simple and quick operation. First, ensure that the key i…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos