Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headrest of an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

How do you remove the front headrest of an Opel Corsa? This video explains how to proceed. First, open the door and enter the rear of the car (rear passenger seat), then: press the button located under the left rail of the front headrest, simultaneously using a plastic lever to press in the slot on the right of the rail; lift the headrest upwards until it can be removed from the front seat back.

To install the front headrest, simply follow the disassembly steps mentioned earlier.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Adjust and Remove the Front Headrest of the Opel Corsa
How to Adjust and Remove the Front Headrest of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) This guide will show you how to adjust and remove the front seat headrest of the Opel Corsa. First, get into the cabin and press the side button on t…
How to Remove the Rear Seat Headrest on an Opel Corsa
How to Remove the Rear Seat Headrest on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Removing the headrests from the front or rear seats of the Opel Corsa model D is a simple and quick task that you can do independently. To carry out …
How to Lower the Rear Seat Backs on an Opel Corsa
How to Lower the Rear Seat Backs on an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) Let's see in these simple and quick steps how to lower the rear seat backs on an Opel Corsa. First, open the rear doors and locate the button that al…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos