Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Lights on Opel Astra K

Model: Vauxhall Astra Astra K - Years 2015-2022
Part: Interior dome light bulb

Use a plastic trim tool (not metal, as this will scratch) or a small screwdriver to enter the small gaps between the light's protective plastic and the roof lining, as shown in the video. Proceed slowly and gently, removing the entire cover a little at a time. Once the cover is free, detach it by hand, taking care not to damage the clips. Voila! At this point, replacing the affected light is straightforward; simply pull it out and insert the new one you purchased. Finally, refit the cover.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Hello! In this tutorial, you will learn how to replace the dipped beam bulb on an Opel Astra G. We specifically chose the bulb for the right front headlamp because the air filter box and intake duct are located nearby. Many mechanics remove this area to a
Hello! In this tutorial, you will learn how to replace the dipped beam bulb on an Opel Astra G. We specifically chose the bulb for the right front headlamp because the air filter box and intake duct are located nearby. Many mechanics remove this area to a
Vauxhall Astra (1998-2006 / Astra G) …
Removing the Indicator Stalk from the Opel Astra
Removing the Indicator Stalk from the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Today's guide will show you how to remove and replace the indicator stalk or bulb switch on the Opel Astra. First, get into the vehicle and start by …
Replacing Interior Lights on Opel Astra
Replacing Interior Lights on Opel Astra
Vauxhall Astra (2004-2010 / Astra H) To remove the front plastic cover in the ceiling containing the interior lights, simply lever it out with a small flat-head screwdriver or a small pl…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos