Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Lift the Rear Seat of the Opel Antara

Model: Vauxhall Antara MK 1 - Years 2006-2015
Part: Seat

To perform a thorough interior cleaning, it is advisable to lift the rear seats to gain more manoeuvring space when using the vacuum cleaner; therefore, open the boot and lift the cover of the load area, and if present, remove the spare wheel; at this point, lever just under the seat to release the anchors that secure the seat to the floor (it is recommended to use a wooden lever); once the seat is released, fold down the backrest to completely lift the seat.

Updated on 19 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the steering wheel airbag of an Opel Antara
How to remove the steering wheel airbag of an Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Before being able to begin, we will have to disconnect the positive pole of the battery of our Opel Antara, so as to work in total safety. We begin b…
How to remove the Opel Antara car radio
How to remove the Opel Antara car radio
Vauxhall Antara (2006-2015 / MK 1) If you want to dismantle the standard car radio on your Opel Antara by yourself, all you have to do is carefully follow the instructions described in…
Resetting the Service Light on the Opel Antara
Resetting the Service Light on the Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Today's guide will show you how to reset the maintenance warning (service) light on the Opel Antara. First, get in the vehicle and turn on the igniti…

Other guides you may be interested in

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos