Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Opel Antara

Model: Vauxhall Antara MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

Today's guide will show you how to reset the maintenance warning (service) light on the Opel Antara. First, get in the vehicle and turn on the ignition; then press and hold the accelerator pedal fully for about five seconds, then turn off the ignition and release the pedal, as shown in the video.

At this point, turn the ignition back on and start the engine, checking that the maintenance warning light has been completely reset on the instrument cluster!


Posted on 7 February 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on the Opel Antara?
How to Reset the Oil Service on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) In this tutorial, see how to reset the oil service on the Opel Antara. This operation is extremely simple and quick, to be performed only after compl…
How to Remove the Steering Wheel Airbag from an Opel Antara
How to Remove the Steering Wheel Airbag from an Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Before you can begin, disconnect the positive terminal of the battery of your Opel Antara to work safely. Start by sitting in the driver's seat, then…
How to reset the Service light on the Opel Antara?
How to reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) To reset the Service light on the Opel Antara, turn on the instrument cluster by turning the ignition key in the ignition switch while pressing the a…

Other guides you may be interested in

    Frequently Asked Questions

    • Antara 2006-2015 - What does the oil warning light indicate with the Opel Antara wrench? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos