Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Accelerator Pedal of the Opel Zafira

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Accelerator

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the accelerator pedal of the Opel Zafira. First, open the bonnet of your car and disconnect the battery; then get inside the vehicle and remove the plastic cover located next to and above the pedal assembly, as shown in the video.

At this point, use a socket wrench with an extension to unscrew and remove the accelerator pedal position sensor; unscrew the screws of the pedal to remove it as well, replacing it with the new one!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to perform self-diagnosis on the Opel Zafira B
How to perform self-diagnosis on the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) In this video, we see how it is possible to access a self-diagnosis mode on the Opel Zafira B by pressing a combination of pedals: this method works …
How to Reset the Service Indicator on Opel Zafira
How to Reset the Service Indicator on Opel Zafira
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) Let’s see how to reset the maintenance service indicator on an Opel Zafira. This operation is very simple: enter the vehicle, press the accelerator p…
How to reset the Service light on the Opel Zafira?
How to reset the Service light on the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Resetting the Service light on the Opel Zafira, specifically the Opel Zafira B, is very simple and immediate. Here’s the correct method: press and ho…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos