Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Opel Antara?

Model: Vauxhall Antara MK 1 - Years 2006-2015
Part: Service warning light

To reset the Service light on the Opel Antara, turn on the instrument cluster by turning the ignition key in the ignition switch while pressing the accelerator pedal. Once the cluster is on, press the accelerator pedal three times in quick succession, then switch off the instrument cluster again. Now you can turn it back on by turning the key to check that the Service light has been completely reset and has disappeared from the instrument cluster.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Opel Antara
Resetting the Service Light on the Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Today's guide will show you how to reset the maintenance warning (service) light on the Opel Antara. First, get in the vehicle and turn on the igniti…
How to Reset the Service Light in the Opel Antara?
How to Reset the Service Light in the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) The procedure to turn off the Service light in the Opel Antara is very simple, takes very little time, and does not require any tools to be connected…
How do you reset the Service light on the Opel Antara?
How do you reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) The Service light that appears on the instrument panel of the Opel Antara can be reset by turning on the instrument panel, turning the ignition key i…

Other guides you may be interested in

    Frequently Asked Questions

    • Antara 2006-2015 - What does the oil warning light indicate with the Opel Antara wrench? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos