Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Opel Antara?

Model: Vauxhall Antara MK 1 - Years 2006-2015
Part: Service warning light

It is possible to completely reset the Service light on the instrument panel of the Opel Antara by turning on the instrument panel, turning the ignition key inside the corresponding block: before doing so, you will need to keep the accelerator pedal pressed. Once the instrument panel is activated, you will need to press the accelerator pedal three times consecutively, and then deactivate the instrument panel again. Now you can turn it on again by turning the key, in order to verify that the Service light has been completely cleared.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Opel Antara?
How do you reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) In order to reset the Service light of the Opel Antara, you need to turn on the instrument panel by turning the key in the ignition switch: once the …
How do you reset the Service light on the Opel Antara?
How do you reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) The procedure for resetting the Service light that appears on the instrument panel of the Opel Antara can be carried out by turning on the instrument…
How do you reset the Service light on the Opel Antara?
How do you reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) The Service light that appears on the instrument panel of the Opel Antara can be reset by turning on the instrument panel, turning the ignition key i…

Other guides you may be interested in

    Frequently Asked Questions

    • Antara 2006-2015 - What does the oil warning light indicate with the Opel Antara wrench? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos