Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Digital Clock on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Clock

This video shows how to replace the digital clock on the instrument panel of the Opel Vivaro. First, remove the upper and lower trims of the dashboard, which are just clipped in, and take out the two screws that are now exposed. The hinge at the top is also clipped in and can be pulled off. At the back, there will be an electrical connector to unplug. The complete instrument cluster code is P8201297597, which can easily be found on e-commerce sites, for example, on morepartz.co.uk/shop/instrument-cluster in the section dedicated to Vauxhall-Opel, with prices starting from £29.99 plus shipping. Once the cluster is replaced, simply reconnect the connector, refit the front and upper trims, and you're done.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock of the Opel Vivaro?
How do you set the clock of the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) In order to adjust the clock of the Opel Vivaro, you need to insert the ignition key into the corresponding slot, so that you can turn on the instrum…
How do you set the clock in the Opel Vivaro?
How do you set the clock in the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) The operation of adjusting the clock of the Opel Vivaro is carried out by turning on the instrument panel, so that it is possible to act on the displ…
How to Set the Clock on an Opel Vivaro?
How to Set the Clock on an Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) To set the clock on an Opel Vivaro, turn on the instrument panel and then press the clock button located to the right of the display at the centre of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos