Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can change the engine oil on the Peugeot Elyseo 125 by loosening the drain plug located at the central lower part of the scooter. Once this plug is loosened, you can proceed to let all the used oil flow into a suitably placed container. This will also allow you to remove the oil filter located in the same spot to replace it with a new one. Now you can top up by adding the necessary amount of oil through the breather on the right side.

Posted on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Peugeot Elyseo 125?
How do you replace the motor oil of the Peugeot Elyseo 125?
Elyseo 125 To replace the engine oil of the Peugeot Elyseo 125, you need to unscrew the drain plug located in the central lower part of the motorcycle: once thi…
How to Change the Engine Oil of the Peugeot Elyseo 125
How to Change the Engine Oil of the Peugeot Elyseo 125
Elyseo 125 Briefly see how to perform the routine maintenance service on the Peugeot Elyseo 125 scooter by changing the engine oil and oil filter. First, place …
How to replace the engine oil and oil filter of the Peugeot Elyseo 125.
How to replace the engine oil and oil filter of the Peugeot Elyseo 125.
Elyseo 125 The instructions below will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of the Peugeot Elyseo 125 …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos