Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Coolant on a Peugeot Metropolis 400

Model: Peugeot Metropolis 400
Part: Antifreeze coolant

Video tutorial

The instructions in this guide will show you how to top up the engine coolant on the Peugeot Metropolis 400 scooter in simple steps. First, place the scooter on the central stand and begin removing the plastic cover located on the right under the handlebars; then unscrew the cap of the coolant reservoir and top up with the appropriate fluid until reaching the maximum level mark.

At this point, start the engine to circulate the fluid, topping up further if necessary.


Posted on 27 May 2026 by ScegliAuto


Related tutorials

How to reset the service on the Peugeot Metropolis 400 scooter?
How to reset the service on the Peugeot Metropolis 400 scooter?
Metropolis 400 In this tutorial, we will see how to reset the service on the Peugeot Metropolis 400 scooter, a very simple and quick operation that should be done o…
How to Reset the Service on the Peugeot Metropolis 400 Scooter?
How to Reset the Service on the Peugeot Metropolis 400 Scooter?
Metropolis 400 In this tutorial, you will learn how to reset the service on the Peugeot Metropolis 400 scooter. This operation is very simple and quick, to be perfo…
How to Change the Engine Oil on a Peugeot Metropolis 400 Scooter
How to Change the Engine Oil on a Peugeot Metropolis 400 Scooter
Metropolis 400 In this tutorial, you will learn how to change the engine oil on a Peugeot Metropolis 400 scooter, a very simple and quick operation to perform every…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos