Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fairings on the Peugeot Kisbee

Model: Peugeot Kisbee
Part:

Video tutorial

In this video tutorial, follow the main instructions to remove and replace the fairings on the Peugeot Kisbee scooter. First, place the scooter on the centre stand and lift the seat.

Unscrew all the side screws of the fairings, also removing the number plate holder. Gently detach the fairings without breaking them, as shown in the video.

Next, replace the rear fairings and then the front fairings in the same manner. Refit the fairings, ensuring that the clips and wiring are correctly positioned, following the video tutorial to the end!


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How do you remove the fairing of the Peugeot Kisbee?
How do you remove the fairing of the Peugeot Kisbee?
Kisbee To disassemble the fairing of the Peugeot Kisbee, you need to loosen all the screws that secure the panels it is made of: start by unscrewing the scr…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…
How to Replace the Exhaust of the Peugeot Kisbee?
How to Replace the Exhaust of the Peugeot Kisbee?
Kisbee To replace the exhaust of the Peugeot Kisbee, you need to loosen the screws that secure the exhaust terminal to its housing, located near the rear wh…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos