Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rifter
    4. : Checks and maintenance

Peugeot Rifter - Checks and maintenance

Checks And Maintenance Peugeot Rifter (2018-2028 / mk 1)

Peugeot Rifter (2018-2026 / MK 1)
How to Fix the Squeaky Clutch Pedal on the Peugeot Rifter
Let’s see how to eliminate the squeak from the clutch pedal on the Peugeot Rifter: first, identify the type of squeak: if it is sharp and metallic, it comes …Read all…
Posted on 7 May 2026 by ScegliAuto
Peugeot Rifter (2018-2026 / MK 1)
How to clean the front cup holder of the Peugeot Rifter
In this video we can see how to remove from its housing, in order to clean it effectively, the front cup holder that is located on both sides of the Peugeot …Read all…
Posted on 1 December 2024 by ScegliAuto
Peugeot Rifter (2018-2026 / MK 1)
How to open the locked tailgate on the Peugeot Rifter van?
In the Peugeot Rifter, it may happen that the tailgate of the trunk gets stuck, for example due to a problem with the control button or the lock actuator. In …Read all…
Posted on 26 April 2024 by ScegliAuto
Car stereo (1) Battery (2) Onboard computer (1) Checks and maintenance (3) Air filter (1) Cabin air filter (1) Diesel fuel filter (1) Parking brake (1) Accessory kit (1) Light bulb (1) Headlight bulb (5) Interior dome light bulb (1) License plate light (1) (1) Clock (3) Door trim panel (1) Front bumper (1) Car door (1) Wheel (3) Fuse box (2) Seat (1) Warning light – error code (3) (14) Tire pressure warning light (2) Service warning light (16) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos