Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear light of the Peugeot 107?

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Tail light

To remove the rear headlight of the Peugeot 107, you need to open the rear hatch so that you can locate the screws next to the headlight unit: these screws must be loosened in order to remove the headlight unit from its housing, disconnecting the connector underneath. Once the headlight is freed, you can then insert the new one into its housing, connecting it to the connector and securing it with the screws: after installation, you will need to verify that everything is functioning correctly.

Posted on 26 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Lights on Peugeot 107
Removing Rear Lights on Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Lift the rear hatch to access the rear light on a Peugeot 107, then locate the screws to remove. Unscrew the screws on the plastic of the light using…
How to replace the rear lights of the Peugeot 107
How to replace the rear lights of the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) The instructions provided in this guide will explain the process of disassembling and replacing the rear lights of the Peugeot 107. First, we open th…
How to Replace the Number Plate Light Bulbs on a Peugeot 107?
How to Replace the Number Plate Light Bulbs on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this tutorial, you will see how to replace the number plate light bulbs on a Peugeot 107, a very simple and quick operation. First, ensure that th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos