Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

Fortunately, replacing the front turn signal bulb of your Peugeot 206 is a very simple operation, so all you have to do is follow the steps described below to complete it without any problems. First of all, lift the front hood of the vehicle and then locate the bulb holder located at the back of the headlight and remove it with your own hands. After properly removing the bulb holder, all you have to do is replace the faulty bulb with a new one and reassemble the bulb holder. Close the hood and you're done.

Posted on 6 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the turn signal bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To safely replace the turn signal bulb of your Peugeot 206, you only need a few seconds. All you have to do is carefully read the following procedure…
How to Replace the Side Indicator Bulb on a Peugeot 206
How to Replace the Side Indicator Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If the side indicator light on your Peugeot 206 is not functioning properly and you want to replace it yourself, simply follow the steps outlined in …
How to Change the Front Indicator Bulbs in the Peugeot 206?
How to Change the Front Indicator Bulbs in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) Replacing the front indicator bulb in the Peugeot 206 is a very simple and quick operation; see how to do it in the attached video tutorial. Open the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos