Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remove the connector using a lever tool to disengage the locking tab, then pull the connector outwards. Next, open the cover of the headlight by twisting it and remove the bulb. Insert the new 12 Volt bulb and close the cover. For the indicator bulb, follow the same procedure but use a 6 Volt bulb. For the right headlight, follow the same steps.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
How to replace the turn signal bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Fortunately, replacing the front turn signal bulb of your Peugeot 206 is a very simple operation, so all you have to do is follow the steps described…
How to replace the turn signal bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To safely replace the turn signal bulb of your Peugeot 206, you only need a few seconds. All you have to do is carefully read the following procedure…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos