Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Right Front Headlight Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

Video tutorial

To replace the right front headlight bulb on a Peugeot 206, open the bonnet and locate the washer fluid reservoir neck in front of the headlight. To create space, gently pull the neck from the reservoir upwards.

Next, remove the plastic or rubber protective cap from the back of the headlight to access the bulb. Disconnect the electrical connector and release the clip that holds the bulb in place.

Remove the burnt bulb and insert the new one, ensuring to respect the polarity and avoiding touching the glass. Reattach the clip, reconnect the connector, and replace the protective cap. Finally, reinsert the washer fluid neck into its housing, close the bonnet, and check the headlights by turning them on.


Posted on 23 October 2026 by ScegliAuto


Related tutorials

Changing the H4 Bulb on a Peugeot 206
Changing the H4 Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will see how to change the front headlamp bulb on a Peugeot 206. First, open the bonnet: removing the bulb is relatively simple as…
How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To correctly complete the replacement of the headlight bulb of your Peugeot 206, you must pay attention to the steps described below and then put the…

Other guides you may be interested in

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos