Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

In a few simple steps, we will see how to replace the low beam and high beam bulb of the front headlight of the Peugeot 206. First, open the hood of the car and start by disconnecting the electrical connector of the bulb; then remove the rubber cover and then release the metal clip, as shown in the video. At this point, remove and replace the bulb with the new one, of the correct type (in this case, with an H4 fitting); connect it to check its operation, and finally reassemble the rubber cover.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb on a Peugeot 206
How to Replace the Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remo…
How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
Removing Front Headlight Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the front headlight bulbs on a Peugeot 206? Let's look at removing the bulbs and parts of the front headlight. Open the bonnet by …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos