Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

To correctly complete the replacement of the headlight bulb of your Peugeot 206, you must pay attention to the steps described below and then put them into practice. First, lift the front hood of the car and then proceed with the removal of the protective cap located behind the headlight that needs to be replaced. After removing the protective cap, disconnect the electrical connector and remove the faulty bulb. At this point, all you have to do is insert the new bulb, reconnect the electrical connector, and reassemble the protective cap.

Posted on 8 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
How to replace the rear headlight bulb of the Peugeot 206
How to replace the rear headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to replace the rear headlight bulb of a 2001 Peugeot 206 car. To replace the bulb, we need to open the trunk and remove the…
Removing Front Headlight Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the front headlight bulbs on a Peugeot 206? Let's look at removing the bulbs and parts of the front headlight. Open the bonnet by …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos