Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight

To replace the front headlight on a Peugeot 206, open the bonnet of the vehicle and locate the mounting points of the headlight unit at the top of the engine bay. Disconnect the electrical connector at the back of the headlight by pressing the safety tab. Next, unscrew the screws or bolts securing the headlight to the bodywork using an appropriate spanner or screwdriver. In some versions, it may be necessary to slightly loosen the front bumper to free the headlight unit. Once all fixings are removed, gently pull the headlight out of its housing. Position the new headlight unit correctly, reattach the fixings, and reconnect the electrical connector. Finally, turn on the lights to check the proper functioning of the headlight and verify the alignment of the beam.

Posted on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight of a Peugeot 206
How to Replace the Headlight of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this short video tutorial, see how to dismantle and replace the front headlight assembly on a Peugeot 206. First, open the bonnet and remove the s…
How to Change the Headlight Bulbs on a Peugeot 206 Plus
How to Change the Headlight Bulbs on a Peugeot 206 Plus
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs fitted on a Peugeot 206. If they are damaged, replace them. Open the access panel, pull the bonnet release lever;…
Removing Front Headlamp from Peugeot 206
Removing Front Headlamp from Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video tutorial, learn how to remove the front headlamp from a Peugeot 206. First, open and lift the bonnet. Then, remove the upper clips from…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos