Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

Video tutorial

The steps outlined in this guide will allow you to remove and replace the dipped beam bulb of the front headlight of the Peugeot 206. First, open the bonnet and start by removing the plastic protective cap of the bulbs; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video.

At this point, install the new dipped beam bulb of the correct type and fitting; check the light's operation and refit the plastic protective cap. Replace the other bulb in the same manner.


Posted on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace the Bulb on a Peugeot 206
How to Replace the Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remo…
Replacing Headlight Bulbs on a Peugeot 206
Replacing Headlight Bulbs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Need to change the damaged headlight bulbs on a Peugeot 206? Here’s how to replace them. Lift the front bonnet by pulling the lever located at the bo…
How to replace the front headlight bulbs of the Peugeot 206
How to replace the front headlight bulbs of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide we will see the instructions useful for disassembling and replacing the bulbs of the front headlight of the Peugeot 206. First, open th…

Other guides you may be interested in

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos