Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the H4 Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

In this video, you will see how to change the front headlamp bulb on a Peugeot 206. First, open the bonnet: removing the bulb is relatively simple as you won’t need to remove any extra components. So, first disconnect the connector and remove the protective rubber of the headlamp by simply pulling it off. At this point, unclip the spring and pull out the bulb! In this case, the vehicle uses an H4 bulb (high and low beam). It is recommended to use good quality replacement parts for better visibility!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
How to Replace the Bulb on a Peugeot 206
How to Replace the Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remo…
How to replace the turn signal bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Fortunately, replacing the front turn signal bulb of your Peugeot 206 is a very simple operation, so all you have to do is follow the steps described…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos