Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of a Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Headlight

To replace the headlight bulb of a Peugeot 3008, start by turning off the engine and making sure the instrument panel is off. Open the hood and locate the back of the headlight that needs to be replaced. Remove the plastic protective cover located behind the headlight, by either rotating or unhooking it, depending on the model. Once opened, locate the bulb holder and disconnect the electrical connector by pulling it carefully. Remove the faulty bulb by rotating it counterclockwise and replace it with a new one of the same type, without touching the glass with your fingers to avoid damage. Insert the new bulb by rotating it clockwise until it locks, then reconnect the electrical connector. Put back the protective cover and check the proper functioning of the headlight by turning it on before closing the hood. If the headlight does not turn on, check the correct connection of the connector or consult a professional.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the 2017 Peugeot 3008.
How to replace the front headlight bulb of the 2017 Peugeot 3008.
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to follow to replace the front headlight bulb of the Peugeot 3008 are: - open the front hood; - remove the cap from the headlight dome; - d…
How to Change the Front Headlight Bulb of the Peugeot 3008
How to Change the Front Headlight Bulb of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Discover in this short and simple guide how to remove and replace the halogen bulb of the front headlight of the Peugeot 3008. First, open the bonnet…
How to replace the headlight bulb of the Peugeot 3008
How to replace the headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today we will explain how to replace the bulb in the front headlight on Peugeot 3008 vehicles. To replace the bulb, we need to remove the cover of th…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos