Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Tail light bulb

In this simple operation, you will need to open the boot lid to access the screws that secure the headlamp. For safety, it is advisable to disconnect the battery to protect all electronic components. Then, remove the clip that secures the panel on the side of the boot, giving you access to the back of the headlamp. Disconnect the connectors and remove the retaining clip that holds the headlamp, then pull it out from the other side, remove the protective panel, and replace the affected bulb. That's it!

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light on the Peugeot 206
How to Remove the Third Brake Light on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, we will see the instructions that will allow you to remove the third brake light on the Peugeot 206 in simple and quick steps. First, open the…
Peugeot 206 Fuse Diagram
Peugeot 206 Fuse Diagram
Peugeot 206 (1998-2012 / MK 1) The fuse boxes of this vehicle are located, the first in the cabin under the steering column and the second in the engine compartment next to the bat…
Peugeot 206 CC Fuse Diagram
Peugeot 206 CC Fuse Diagram
Peugeot 206 (1998-2012 / MK 1) The fuse box is located at the bottom of the dashboard, to the left of the steering column. To open the box, use a coin to lever and detach the cover…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos