Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the fog light on a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fog lights
Operation: How to replace the fog light on a Peugeot 206

If the fog light of your Peugeot 206 no longer works properly and you want to find out how to replace it yourself and correctly, then you just have to put the following steps into practice. First, turn off the engine of your car and go to the fog light to be replaced. Unhook the latter by acting on the lever present in the whole part of the bumper and then disconnect the electrical connector. At this point unscrew the old bulb and screw in the new one. Reconnect the connector and reposition the fog light correctly.


Posted on 28 November 2022 by ScegliAuto



How to activate the fog lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, we will have to sit on the driver's seat of our Peugeot 206. Let's start by inserting the key in the ignition, and then activate the
Replacement of the front headlight bulb of the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Peugeot 206. First of all, let's mov
How to replace the fog light bulb on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the Peugeot 206 fog light bulb, you need to rotate the corresponding front wheel, so that you can have access to the internal cov

    Frequently Asked Questions

    • 206 1998-2012 - Why are the Peugeot 206 fog lights not working? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos