Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Replacement of the front headlight bulb of the Peugeot 206.

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fog lights
Operation: Replacement of the front headlight bulb of the Peugeot 206.

Today we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Peugeot 206. First of all, let's move to the side and start by removing the plastic cover located behind the wheel arch; then disconnect the electrical connector of the bulbs and unscrew the fixing screws of the fog light, as shown in the video. At this point, install the new fog light bulb and reassemble the light, then reassemble the plastic cover; finally, reassemble the wheel arch and check the operation of the bulb!


Posted on 3 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - Why are the Peugeot 206 fog lights not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos