Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheels on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Wheel

In this brief and simple guide, you will learn how to remove and replace the wheel on your Peugeot 206, as well as on most vehicles from the Citroen-Peugeot group. First, gather the wheel replacement kit by taking the wheel, wrench, and jack from the boot; then loosen the wheel bolts before lifting the vehicle with the jack, as shown in the video. At this point, finish loosening the bolts to remove and replace the wheel with the spare; after tightening the bolts properly, return all equipment to the boot!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Spare Wheel in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The spare wheel of the Peugeot 206 is located at the bottom of the car, in the boot area: to access this wheel, you will need to open the rear hatch …
Oil Filter Replacement on a Peugeot 206
Oil Filter Replacement on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench to uns…
Timing Belt Replacement on Peugeot 206
Timing Belt Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the timing belt on the Peugeot 206 if it needs changing. Changing the timing belt is very important to avoid damaging the engine. Here’s how t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos