Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

Video tutorial

Today, we will see the instructions that will allow you to remove the third brake light on the Peugeot 206 in simple and quick steps. First, open the boot and start by unscrewing the two fixing nuts located at the top of the boot; then, extract the third brake light from the outside by disconnecting the electrical connector of the bulbs found at the back.

At this point, you will be able to replace the bulbs or the entire third brake light unit if necessary; finally, reassemble everything by applying the reverse procedure of disassembly!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on the Peugeot 206 SW
How to Replace the Horn on the Peugeot 206 SW
Peugeot 206 (1998-2012 / MK 1) In a few simple steps, we will see how to remove and replace the horn or sounder on the Peugeot 206 and 206 SW. First, locate the horn, situated low …
How to Remove the Horn on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Want to remove the horn on a Peugeot 206? Follow this guide for disassembly in the instructional video. Open the engine bonnet by pulling the release…
Peugeot 206 Fuse Diagram
Peugeot 206 Fuse Diagram
Peugeot 206 (1998-2012 / MK 1) The fuse boxes of this vehicle are located, the first in the cabin under the steering column and the second in the engine compartment next to the bat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos