Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on Peugeot cars?

Model: Peugeot Peugeot Various
Part:

In order to reset the tire pressure warning light on Peugeot vehicles, you need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires have been properly inflated, you can select the option for tire pressure on the central display of the dashboard: by doing so, the warning light will disappear from the instrument panel, which can then be turned off. Turning it back on, you will notice that the warning light has completely disappeared.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light on a Peugeot vehicle
How to reset the AdBlue warning light on a Peugeot vehicle
Peugeot Peugeot Various To reset the AdBlue warning light on a Peugeot vehicle, it is first necessary to top up the liquid inside the tank. Once this operation has been carr…
How to Reset the Tyre Pressure on a Peugeot Vehicle
How to Reset the Tyre Pressure on a Peugeot Vehicle
Peugeot Peugeot Various When the outside temperature begins to drop, the tyre sensors may start to malfunction. The first thing to do is check the pressure at a tyre shop, b…
How to Reset the Radio in Peugeot Cars?
How to Reset the Radio in Peugeot Cars?
Peugeot Peugeot Various To reset the radio in Peugeot cars, there is a common procedure that can be performed on all vehicles produced by the manufacturer: first, turn on th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos