Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on a Peugeot Vehicle?

Model: Peugeot Peugeot Various
Part: AdBlue warning light

Video tutorial

In this video, you will see how to reset the AdBlue warning light on a Peugeot vehicle: first, fill the AdBlue tank (leaving a little air). Use quality AdBlue and turn on the ignition. In most cases, the system resets itself after driving for about 12 miles, then allow the control unit to reset itself.

If this does not work, try the manual procedure by looking in the menu "Maintenance/Vehicle Info/Pollution Control Systems Status/Reset AdBlue Level". However, this option is not available on all Peugeots. You may need to use a diagnostic tool.

The safest choice is DiagBox, which is the official software for Peugeot/Citroen. Access "Injection" or directly into the "SCR" or "Pollution Control" unit until you find "Clear Permanent Errors": follow the on-screen instructions of the tool.


Posted on 31 March 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on a Peugeot Vehicle
How to Reset the AdBlue Warning Light on a Peugeot Vehicle
Peugeot Peugeot Various The procedure to reset the AdBlue warning light on a Peugeot vehicle is a simple and quick operation that can be done independently. Go to a parking …
How to Reset the AdBlue Warning Light on a Peugeot Vehicle
How to Reset the AdBlue Warning Light on a Peugeot Vehicle
Peugeot Peugeot Various To reset the AdBlue warning light on a Peugeot vehicle, first top up the liquid in the tank. Once this is done, you can reset the light using a diagn…
How to Reset the AdBlue Warning Light on a Peugeot
Peugeot Peugeot Various The AdBlue warning light on a Peugeot vehicle illuminates when it is necessary to refill the liquid in the tank. To reset the warning light, turn on …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos