Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

To ensure that the programming of the Peugeot 206 key takes place, you will need to connect a diagnostic tool to the OBD port of the vehicle: the latter will be located under the steering column. Once the connection has been made, you will need to insert the ignition key and turn it to position two: you will then be able to navigate the screen to follow the necessary programming instructions. When the programming procedure is complete, you can disconnect the device to verify that the key is working correctly.

Posted on 6 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To program the key of the Peugeot 206, you need to connect a diagnostic tool to the OBD port of the vehicle, after inserting the blank key into the k…
How to Replace the Key Shell on a Peugeot 206?
How to Replace the Key Shell on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the key shell on a Peugeot 206, loosen the screw located at the back of the key and remove the cover to access the chip inside. At this po…
Changing Oil on Peugeot 206 1.1
Changing Oil on Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Learn how to replace the engine oil on a Peugeot 206. Lift the bonnet to remove the oil filter. Raise the vehicle on a column lift or jack, unscrew t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos