Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Peugeot 2008.

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

In today's video, we will see how to reset the service light on a Peugeot 2008, second series model produced from 2019 onwards. So first of all, with the ignition off, we need to press and hold the left turn signal stalk button and then turn on the car's instrument panel without starting the engine. After that, a ten-second countdown will appear on the digital speedometer, so we continue to hold down the previous button until the time expires to reset the service light, and finally restart the car.

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2024 Peugeot 2008
How to Reset the Service Light on a 2024 Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Today, I will explain how to reset the service light on a 2024 Peugeot 2008. To reset the light, press the BC button located on the left lever of the…
How to Reset the Service Light on Peugeot 2008?
How to Reset the Service Light on Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Here’s a video guide dedicated to cancelling the Service light on the Peugeot 2008. Firstly, note that no electronic diagnostic tools are needed for …
How to restore the service light of the Peugeot 2008
How to restore the service light of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) In the following guide, we will explain how you can manually reset the service light on the instrument panel of your Peugeot 2008 second series (2020…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos