Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter of the Peugeot 3008/5008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Cabin air filter

In this video, we will see how to replace the cabin air filter of the Peugeot 3008/5008: the filter is located in the footwell of the right seat, so we first need to remove the partition located on the top left of the compartment and then the panel located under the glove box, which is held in place by three plastic clips. Inside, we need to remove a black plastic drawer, where there are two overlapping filters. We need to remove both of them and clean the compartment with a blast of compressed air, as access is not easy to reach with our hands and clean with a cloth; but we need to remove dust and residue. We place the two new filters in their place, paying attention to the direction of installation, with the tabs facing outward. Then we put back the cover and the panel under the glove box. We also put back the partition in the footwell and we're done.

Posted on 23 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Peugeot 3008
How to Replace the Cabin Air Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / T84, MK 1) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Replace the Cabin Air Filter in a Peugeot 3008
How to Replace the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right side of the glove compartment (unscrew the se…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos