Do it yourself
Frequently asked questions about cars and motorcycles

How to change the cabin air filter of the Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

Video tutorial

To replace the cabin air filter on the Peugeot 407, secure the car, turn off the ignition, and work on the passenger side. The access shown is in the area under the dashboard: after clearing the space, you reach the filter housing (positioned vertically) behind a cover.

Remove or move the lower panel just enough to reach the cover of the housing, then unlock the cover and open it. At this point, pull out the filter by sliding it out of the guide, being careful not to spread dust and debris inside the compartment. Before installing the new filter, check the direction of airflow indicated on the filter (arrow/"AIRFLOW") and insert it with the same orientation, making sure it fits completely into the housing without bending.

Close the cover of the housing, reposition the panel under the dashboard, and ensure everything is securely attached. If after the replacement you hear abnormal air noises or a reduced airflow, double-check that the filter is seated properly and that the cover is closed correctly.


Posted on 14 January 2026 by ScegliAuto


Related tutorials

Peugeot 407 (2004-2012 / MK 1) Replacing the cabin air filter on your Peugeot 407 is really simple, and you just need to follow the steps described in this guide. First, open the d…
Peugeot 407 (2004-2012 / MK 1) To correctly replace the front headlamp bulb in your Peugeot 407, follow the procedure described in this guide. First, ensure the car is parked safel…
Peugeot 407 (2004-2012 / MK 1) The video author demonstrates how to replace the cabin air filter in their Peugeot 407. The actual guide begins at minute 6 of the video; everything …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos