Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Service warning light

In this tutorial, we can see how to reset the service in the Peugeot 2008, an extremely simple and quick operation to be carried out only after completing all scheduled maintenance work. Let's start by going inside the cabin, then insert the key but leave it in the first position. Next, press and hold the button located at the end of the left control lever, simultaneously turn on the instrument panel, and keep the button pressed for the entire duration of the countdown displayed. To complete the procedure, simply restart the vehicle.

Posted on 28 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…
Reset Service Light on Peugeot 2008
Reset Service Light on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Let's see how to reset the maintenance light on a Peugeot 2008. Enter the vehicle and turn on the ignition, locate the light that needs resetting, an…
How to reset the "Service" light on a Peugeot 2008?
How to reset the "Service" light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Good morning, today the goal is to reset the "Service" light on our Peugeot 2008. Before performing this procedure, it will be necessary to have prop…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos