Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2025
Part:

In this brief guide, we will see the steps necessary to reset the tyre pressure warning light on the Peugeot Expert. Before resetting the TPMS sensors, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition. Next, go to the vehicle settings from the central display and then to the tyre pressure option, as shown in the video. At this point, confirm and perform the reset and recalibration of the sensors, thus clearing the TPMS warning!

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Peugeot Expert
Resetting the Service Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) The Peugeot Expert's control system alerts you with a message on the instrument cluster when it's time to change the engine oil. After performing thi…
Reset the Engine Oil Warning Light on the Peugeot Expert
Reset the Engine Oil Warning Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) Follow the procedure to reset the engine oil maintenance warning light on the Peugeot Expert. First, get in the vehicle and press and hold the "set" …
How do you reset the tire pressure warning light on the Peugeot Expert?
How do you reset the tire pressure warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the tire pressure warning light of the Peugeot Expert, you need to inflate the tires to the corresponding pressure value: this value is indi…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos