Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a 2005 Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Service warning light

The service light on a 2005 Peugeot 307 can be reset easily and the same procedure applies to many similar models. As shown by the YouTuber, first locate and press the reset button on the dashboard, and while holding it down, turn the key to the ON position to activate the instrument cluster. The engine must remain off. Looking at the small display next to the button being pressed, you will notice a countdown of ten seconds: when it ends, the reset procedure is complete and you can release the button.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To reset the service light related to the car service on the Peugeot 307, we first need to get into the vehicle and then press the TRIP A button loca…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today we will explain how to reset the service light of the Peugeot 307, in a simple and quick way. Get into the car and insert the key into the igni…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) When the service light comes on in the Peugeot 307, it means that the driver must carry out a complete check of the vehicle. After performing the ser…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos