Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator on the External Mirror of a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Side mirror

In this video tutorial, you will learn how to replace the indicator on the external mirror of a Peugeot 208. This is not a very complex job, so you can confidently try it yourself. First, remove the rear cover to access the indicator using a plastic trim tool to release the two internal clips. Once you reach the indicator, disconnect its electrical connector and remove it from its housing, installing the replacement. Once done, you can reassemble everything and complete the job.

Posted on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…
How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In order to remove the external rearview mirror of your first series Peugeot 208, all you have to do is follow all the steps described in this new mi…
How to Replace the External Wing Mirror on a Peugeot 208?
How to Replace the External Wing Mirror on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the external wing mirror on the Peugeot 208, use a tool to pry off the trim of the door handle; once removed, unscrew the screws underneat…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos